This torque wrench with dual-direction ratchet makes it easy to work on your bike components. Clicking torque knob lets you recalibrate the wrench so it's always accurate. Includes 13 commonly used hex and Torx bits.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Feedback Sports Range torque wrench and ratchet tool combo. This is a flex-bar torque wrench and two-way ratchet tool that will allow you to easily install, remove, and adjust your bike components. It's perfect for use on the trail, in the shop or at home in your garage. It's got a compact head and bit design that allows clearance and full function in tight spaces. The torque knob here is going to allow you to set and calibrate the wrench so it's always accurate for you.
You can see we've got a meter here from two newtons to 14 newtons that will allow you to simply rotate until you reach the desired torque. That's gonna help prevent damage to your bike parts due to over tightening. So, you can see there's a spring in there. There's a little middle lever that's going to, let me get that a little bit closer for you, so you can see how that's gonna operate. So, as you twist, you can see where your newton-meters is gonna be, so that you can make sure that you're getting the right torque that you need.
This does have a red anodized aluminum body, so it's gonna be lightweight, yet very strong and durable. It includes 13 commonly used hex torques and Phillips bits, including the hex bits, from two millimeters up to eight millimeters. And then your torques tools and Phillips bits that are common. So, these are all premium S2 steel bits and they are size stamped to make sure that you're getting them easily identified. Make sure you can get 'em put back where you need to be to have everything organized.
Our case here is gonna have these elastic strips, so we can keep everything organized and contained together. So, we'll slide that in there, slide our bits in this portion here. This does also have a storage pocket here on the side, so if we have any additional small gear that we want to put in there, we can. And then, we have the flaps here that will help to keep everything in place with some hook and loop strips there. And then, on the exterior, we have these snaps, again, to make sure that everything stays in place.
So, this is a very compact case. It's going to easily fit in the palm of your hand, in your storage, like backpack, tool bags or vehicle. Give you a measurement here. You can see our overall length, we're looking at about six and a half inches. Our width is about two and three quarters, and it's only about one inch thick. So, very compact, easy to keep stored where you need it. And then, when you need to use it, you can just simply pull it out and be ready to go. This does come with a limited lifetime warranty, so if you we're to have any issues with it, you're more than welcome to reach out to us here at etrailer.com, but overall, I think this is gonna be a very nifty, or useful tool to have on hand ready for any maintenance that you need. And that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.